Product - Page 3 of 4 - CLENA Solutions: High-Pressure Washers for Professionals

Art. No.	Pressure bar	Flow Rate L/min	Power kW	Nozzle ø
BMK270-27	270	27	–	–
BMK300-23	300	23	–	–
BMK350-21	350	21	–	–
BMK500-15	500	15	–	–

SERIES BMK / 14 HP PETROL ENGINE

The high pressure washers of the BMK Series are powered by an petrol engine, eliminating the need for an external power supply. They offer maximum mobility and flexibility for use in areas without infrastructure.

PRESSURE

150 bar to 240 bar

FLOW RATE

15 L/min to 25 L/min

MOTOR POWER

14 HP / 10,5 kW

Datasheets

Request

MODEL VARIATIONS

Artikelnr	Pressure bar	Flow rate L/min	Power kW	Nozzle ø
BMK160-25	160	25	–	–
BMK200-20	200	20	–	–
BMK250-15	250	15	–	–
BMK160-25E	160	25	–	–
BMK200-20E	200	20	–	–
BMK250-15E	250	15	–	–

DEVICE FEATURES

poxy-coated steel frame with stainless steel cover
Two-wheel chassis with durable rubber tires
14 HP (10.5 kW) 4-stroke petrol engine, speed-reduced to 3,100 rpm
Reduction gearbox from 3,100 rpm to 1,450 rpm
Triplex high-pressure pump with brass cylinder head, solid ceramic pistons, and stainless steel valves
– Oil-lubricated, low-noise, and vibration-free operation
Electronic ignition with speed-dependent ignition timing adjustment
External fuel shut-off valve with integrated water separator
Three-position choke lever for easy start-up
External oil level sensor with emergency shut-off
Coarse fuel filter in the fuel tank
Exhaust mounting with flange and reinforcement struts
Two oil dipsticks for easy maintenance

Dimensions and Weight

Width: 600 mm
Height: 890 mm
Weight: approx. 70 kg

EQUIPMENT

Standard accessory kit SWS

10 m high-pressure hose DN10, kink protection on both side
High-pressure gun HDP350 with quick coupling and swivel joint in the inlet
Double jet pipe made of stainless steel with high- and low- pressure nozzle

For devices up to 350 bar

Similar Products

SERIES BMK / 25 HP PETROL ENGINE

The high pressure washers of the BMK Series with a petrol engine are eliminating the need for an external power supply. They offer maximum mobility and flexibility for work in areas without infrastructure.

PRESSURE

170 bar to 500 bar

FLOW RATE

15 L/min to 50 L/min

MOTOR POWER

25 HP / 18,7 kW

CLENA Hochdruckreiniger für Profis high pressure washer for professionals

Get in Touch Now

Are you looking for a durable and powerful cleaning solution? Then CLENA Solutions GmbH is the right choice for you. Contact us for a personalized consultation – together, we’ll find the optimal solution for your cleaning requirements.

Our Products

Stationäre Kaltwasser-Hochdruckreiniger ST2500

CLENA ST2500 stationäre Hochdruckanlage mit Gestell

Series ST2500

The ideal solution for stationary high pressure cleaning systems that can be connected to hose reels or fixed pipe installations. Available as standalone units or as part of an integrated cleaning system, they deliver maximum cleaning performance in minimal space.

PRESSURE

150 bar to 240 bar

FLOW RATE

15 L/min to 30 L/min

POWER

5,5 kW to 7,5 kW

Datasheets

Request

MODEL VARIANTS

Art.No.	Pressure bar	Flow rate L/min	Power kW	Nozzle ø
ST2521055	150	21	5,5	075
ST2521065	170	21	6,5	070
ST2525065	150	25	6,5	090
ST2530075	150	30	7,5	100

DEVICE FEATURES

Epoxy-coated steel frame with noise and vibration damped stainless steel cover
Powerful motors in many performance classes with long service life due to low speed (1.450/1750 1/min)
Triplex high-pressure pump with brass cylinder head, full ceramic pistons and stainless steel valves, oil-bath lubricated, low-noise and vibration-free
Vibration-damping rubber feet
Control cabinet made of powder-coated steel (IP66)
Function switch 1-0-2 with indicator light stand-by
Automatic start-stop (optionally pressure or flow controlled, please specify when ordering)
24 V control
Restart monitoring
Externally routed earthing
Water inlet temperature up to 60 °C
Power supply: 400 V, 3 phases, 50/60 Hz
Dimensions: Length 685 mm x Width 425 mm x Height 685 mm
Weight: approx. 95 kg

EQUIPMENT

Standard accessory kit SWS

- 10 m high-pressure hose DN10, kink protection on both sides
- High-pressure gun HDP350 with quick coupling and swivel joint in the inlet
- Double jet pipe made of stainless steel with high- and low- pressure nozzle

For devices up to 350 bar

Similar Products

SERIES STC2500

If no change in location is planned, our stationary high pressure cleaning systems provide maximum cleaning performance in minimal space. This cost efficient and space saving solution is ideal for applications where no cover is required, for example in stables, milking parlours or other commercial environments.

PRESSURE

150 bar to 240 bar

FLOW RATE

14 L/min to 25 L/min

POWER

4,0 kW to 6,5 kW

CLENA stationärer Hochdruckreiniger ST1500

Series ST1500

If you don’t plan to move the equipment, our stationary high-pressure washers deliver maximum cleaning performance in the smallest of spaces. The ideal solution for stationary cleaning machines that can be connected to hose reels or fixed piping systems. Whether used individually or as part of an integrated cleaning system, they deliver maximum cleaning performance in a minimal amount of space.

PRESSURE

150 bar bis 240 bar

FLOW RATE

14 L/min bis 30 L/min

POWER

5,5kW bis 7,5 kW

Get in Touch Now

Are you looking for a durable and powerful cleaning solution? Then CLENA Solutions GmbH is the right choice for you. Contact us for a personalized consultation – together, we’ll find the optimal solution for your cleaning requirements.

Our Products

Series ST1500

If you don’t plan to move the equipment, our stationary high-pressure washers deliver maximum cleaning performance in the smallest of spaces. The ideal solution for stationary cleaning machines that can be connected to hose reels or fixed piping systems. Whether used individually or as part of an integrated cleaning system, they deliver maximum cleaning performance in a minimal amount of space.

PRESSURE

150 bar bis 240 bar

FLOW RATE

14 L/min bis 30 L/min

POWER

5,5kW bis 7,5 kW

Datasheets

Request

MODEL VARIANTS

Art. No	Pressure bar	Flow Rate L/min	Power kW	Nozzle ø
ST1515055	200	15	5,5	045
ST1518055	170	18	5,5	060
ST1521055	150	21	5,5	075
ST1515065	240	15	6,5	040
ST1518065	200	18	6,5	055
ST1521065	170	21	6,5	070
ST1525075	150	25	6,5	090
ST1521075	200	21	7,5	065
ST1525075	170	25	7,5	080
ST1530075	150	30	7,5	100

DEVICE FEATURES

Epoxy-coated steel frame with noise- and vibration-dampened stainless steel cover
High-performance motors in a wide range of power classes with a long service life thanks to low speed (1,450/1,750 rpm)
Triplex high-pressure pump with brass cylinder head, all-ceramic pistons, and stainless steel valves; oil-bath lubricated, low-noise, and vibration-free
Automatic start-stop (optionally pressure- or flow-controlled; please specify when ordering)
Maximum water inlet temperature: 60 °C
Power supply: 400 V, 3-phase, 50/60 Hz
Dimensions: Length 685 mm x Width 410 mm x Height 355 mm
Weight: approx. 70 kg

EQUIPMENT

SWS Standard Accessory Kit

10 m high-pressure hose (DN10), with kink protection on both ends
HDP350 high-pressure gun with quick-connect coupling and swivel joint at the inlet
Stainless steel dual-jet nozzle with high- and low-pressure nozzles

For equipment up to 350 bar

Similar Products

SERIES STC2500

If no change in location is planned, our stationary high pressure cleaning systems provide maximum cleaning performance in minimal space. This cost efficient and space saving solution is ideal for applications where no cover is required, for example in stables, milking parlours or other commercial environments.

PRESSURE

150 bar to 240 bar

FLOW RATE

14 L/min to 25 L/min

POWER

4,0 kW to 6,5 kW

Series ST2500

The ideal solution for stationary high pressure cleaning systems that can be connected to hose reels or fixed pipe installations. Available as standalone units or as part of an integrated cleaning system, they deliver maximum cleaning performance in minimal space.

PRESSURE

150 bar to 240 bar

FLOW RATE

15 L/min to 30 L/min

POWER

5,5 kW to 7,5 kW

Get in Touch Now

Are you looking for a durable and powerful cleaning solution? Then CLENA Solutions GmbH is the right choice for you. Contact us for a personalized consultation – together, we’ll find the optimal solution for your cleaning requirements.

Our Products

WEEDEX MWE200

WEEDEX hot water devices use the most efficient method for chemical-free weed control! The hot water penetrates the soil layer and destroys the cell structure of the plant. Due to this root-deep effect, a low treatment frequency is achieved, as well as a high area performance. In addition, the flow heater can also be used as a HotBox for high-pressure applications up to 200 bar!

PRESSURE

6-8 (with high-pressure application max. 200 bar)

FLOW RATE

8-14 L/min (with high-pressure application up to 28 L/min)

HEATING CAPACITY

approx. 90 kW

WATER OUTLET TEMPERATURE

approx. 85 °C to 100 °C

Datasheets

Request

MODEL VARIATIONS

Art.No.	Pressure bar	Flow rate L/min
MWE200	6-8 (max 200 bar)	8 bis 14 (bei HD Anwendung bis 28 L/min)

DEVICE FEATURES

Epoxy-coated steel frame with stainless steel cover
Four-wheel chassis with rubber-tyres
Heating capacity approx. 90 kW
Water outlet temperature 85-100°C
Connection hose 1,5 m
Flame monitoring (optical)
Thermal switch and flow monitoring
Diesel fuel tank capacity approx. 16 L
Dimensions: Length 700 m x Width 570 mm x Height 800 mm
Weight approx: 80 kg

EQUIPMENT

WeedEx Zubehörset

Stainless steel handheld spray cart for surface treatment:

1,100 mm long handle tube ∙ 400 mm working width and 4 nozzles for concentrated
hot water pressure
Sturdy industrial casters for all surfaces

Get in Touch Now

Are you looking for a durable and powerful cleaning solution? Then CLENA Solutions GmbH is the right choice for you. Contact us for a personalized consultation – together, we’ll find the optimal solution for your cleaning requirements.

Our Products

STANDARD ACCESSORY KIT H5000

30 m high-pressure hose DN10, kink protection on both sides; High-pressure gun HP600 soft CL with swivel joint in the inlet; Jet pipe CL with nozzle guard incl. high-pressure nozzle

Request

Similar Products

STANDARD ACCESSORY KIT KB

HDP350 high-pressure gun with quick-connect coupling and swivel joint at the inlet; Stainless steel dual-jet nozzle with high- and low-pressure nozzles; For units up to 350 bar

ACCESSORY KIT FOR MFI10

10-meter high-pressure hose, blue, DN12, with 1/2" stainless steel fittings and quick-connect couplings on both ends; Special foam lance set with a high-pressure stainless steel foam gun; Special nozzle set for foaming, washing, and disinfecting

WEEDEX ACCESSORY KIT

Handsprühwagen aus Edelstahl zur Flächenbearbeitung: 1100 mm langes Griffrohr ∙ 400 mm Arbeitsbreite und 4 Düsen für konzentrierte Heisswasserenergie ∙Stabile Industrierollen für alle Oberflächen

Get in Touch Now

Are you looking for a durable and powerful cleaning solution? Then CLENA Solutions GmbH is the right choice for you. Contact us for a personalized consultation – together, we’ll find the optimal solution for your cleaning requirements.

Our Products

CLENA Kaltwasser-Hochdruckreiniger H5031

CLENA Kaltwasser-Hochdruckreiniger H5030

SERIES H5031

The CLENA H5000 Series offers the maximum robustness and durability and is designed for the toughest industrial environments and construction sites. With 30 L/min flushing capacity at 500 bar water pressure, the machines deliver amazing results, e.g. in concrete blasting or tank cleaning.

PRESSURE

500 bar

FLOW RATE

30 L/min

MOTOR POWER

30,0 kW

Datasheets

Request

MODEL VARIATIONS

Art.No.	Pressure bar	Flow rate L/min	Motor power kW	Nozzle ø	Foam nozzle ø
H5030	500	30	30	055	–

DEVICE FEATURES

Epoxy-coated steel frame with stainless steel cover
Compact, ergonomic chassis with two ball-bearing wheels (fitted inside the chassis), two swivel castors with total stop function (wheels and steering braked)
Crane lifting points on the unit for safe lifting during transport
Powerful motor with long service life due to low speed (1.000/1.200 1/min)
Triplex high-pressure pump with brass cylinder head, full ceramic pistons and stainless steel valves, oil-bath lubricated, low-noise and vibration-free
Water inlet temperature 60 °C, thermal valve
Main switch with emergency stop function according to DIN and function switch 1-0-2
Separate safety valve
Restart monitoring
Automatic soft-start function
Connection cable 5,00 m with 63 A plug, earth terminal
5“ water inlet filter
Operating and control elements at viewing height
Power supply: 400 V, 3 phases, 50 Hz / 460 V, 3 phases, 60 Hz
connection cable: 5,0 m with 32 A plug (50/60 Hz), earth terminal
Dimensions: Length 1200 mm x Width 700 mm x Height 1100 mm
Weight approx: 450 kg

EQUIPMENT

DPM-CLENA-500bar-Zubehoer-e1653301913484

Standard accessory kit H5000

30 m high-pressure hose DN10, kink protection on both sides
High-pressure gun HP600 soft CL with swivel joint in the inlet
Jet pipe CL with nozzle guard incl. high-pressure nozzle

Similar Products

SERIES UHD

The UHD series is designed for the most demanding industrial applications where maximum performance is required. With an operating pressure ranging from 1,000 to 2,000 bar, it is ideal for particularly intensive surface preparation and material removal tasks. At the same time, it impresses with its simple and robust design, which ensures high reliability. Despite its enormous power, the system remains particularly easy to handle and flexible in use, weighing only 650 kg and featuring compact dimensions.

PRESSURE

up to 2000 bar

FLOW RATE

up to 18 L/min

POWER

30,0 kW

SERIES H9000XS

Developed for professional use in industry, this is the most compact machine in the H series. With its extreme narrow design and the fold-out carrying handles, the machine is optimised for narrow operating aisles, such as in the maritime sector. These machines are designed for continuous use in demanding cleaning tasks, where there can be no compromises.

PRESSURE

500 bar

FLOW RATE

15 L/min

MOTOR POWER

15,0 kW

CLENA Hochdruckreiniger für Profis 500 bar High pressure washer for professionals H9000

SERIES H9000

Developed for professional use in industry, the H-Series is available in a wide range of pressure and flow combinations up to 500 bar and 60 L/min. This allows exact adaption to any customer requirement. These machines are designed for continuous use in demanding cleaning tasks, when there must be no compromises.

PRESSURE

170 bar to 500 bar

FLOW RATE

15 L/min to 60 L/min

MOTOR POWER

11,0 kW to 18,5 kW

Get in Touch Now

Are you looking for a durable and powerful cleaning solution? Then CLENA Solutions GmbH is the right choice for you. Contact us for a personalized consultation – together, we’ll find the optimal solution for your cleaning requirements.

Our Products

CLENA - M2000-schraeg-vorn-e1647647382261

CLENA Heißwasser Hochdruckreiniger M2000

SERIES M2000

Hot water high-pressure washers from CLENA are the epitome of washing performance. With water temperatures of 100°C and more, they remove every kind of residue in demanding industrial cleaning applications. Powerful combinations of water and pressure enable a wide range of applications.

PRESSURE

100 bar to 240 bar

FLOW RATE

14 L/min to 30 L/min

POWER

4,0 kW to 7,5 kW

Datasheets

Request

MODEL VARIATIONS

Art.No.	Pressure bar	Flow rate L/min	Power kW	Nozzle ø
M2014040	160	14	4,0	045
M2015040	150	15	4,0	055
M2015055	200	15	5,5	045
M2018055	170	18	5,5	060
M2021055	150	21	5,5	075
M2015065	240	15	6,5	045
M2018065	200	18	6,5	055
M2021065	170	21	765	070
M2025065	150	25	6,5	090
M2021075	200	21	7,5	065
M2025075	170	25	7,5	080
M2030075	150	30	7,5	100

DEVICE FEATURES

- Epoxy-coated steel frame with stainless steel cover
- Four-wheel chassis with rubber tyres
- Powerful motors in many performance classes with long service life due to low speed (1.450/1750 1/min)
- Triplex high-pressure pump with brass cylinder head, full ceramic pistons and stainless steel valves, oil-bath lubricated, low-noise and vibration-free
- Automatic pressure relief of the high-pressure hose
- Water inlet temperature up to 60 °C
- Heating capacity 90 kW
- Water outlet temperature up to 100 °C
- Automatic start-stop (optionally pressure or flow controlled, please specify when ordering)
- Diesel tank capacity approx. 32 L
- Power supply: 400 V, 3 phases, 50/60 Hz
- Dimensions: Length 1070 mm x Width 620 mm x Height 870 mm
- Weight: approx. 125 to 170kg (depends on equipment)

EQUIPMENT

Standard accessory kit SWS

10 m high-pressure hose DN10, kink protection on both sides
High-pressure gun HDP350 with quick coupling and swivel joint in the inlet
Double jet pipe made of stainless steel with high- and low- pressure nozzle

For devices up to 350 bar

Similar Products

SERIES MC2000

The entry-level model for the discerning customer, combining robust performance with a highly competitive price. Ideal for a wide range of general cleaning applications.

PRESSURE

120 bar to 170 bar

FLOW RATE

10 L/min to 21 L/min

POWER

,2 kW to 5,5 kW

Get in Touch Now

Are you looking for a durable and powerful cleaning solution? Then CLENA Solutions GmbH is the right choice for you. Contact us for a personalized consultation – together, we’ll find the optimal solution for your cleaning requirements.

Our Products

SERIES H9000XS

Developed for professional use in industry, this is the most compact machine in the H series. With its extreme narrow design and the fold-out carrying handles, the machine is optimised for narrow operating aisles, such as in the maritime sector. These machines are designed for continuous use in demanding cleaning tasks, where there can be no compromises.

PRESSURE

500 bar

FLOW RATE

15 L/min

MOTOR POWER

15,0 kW

Datasheets

Request

MODEL VARIANTS

Art.No.	Pressure bar	Flow rate L/min	Motor power kW	Nozzle ø	Foam nozzle ø
H9415SX	500	15	15,0	030	–

DEVICE FEATURES

Epoxy-coated steel frame with stainless steel cover
Compact, ergonomic chassis (extreme narrow design) with two fixed wheels and two swivel wheels with total stop function (wheels and steering braked)
Crane lifting points on the unit for safe lifting during transport
Foldable handles
Powerful motor with long service life due to low speed (1.450/1.750 1/min)
Triplex high pressure pump with brass cylinder head, full ceramic pistons and stainless steel valves, oil-bath lubricated, low-noise and vibration-free
Water inlet temperature up to 60 °C, thermal valve
Main switch with emergency stop function according to DIN and function switch 1-0-2
Restart monitoring
Automatic soft-start function
5“ water inlet filter
Operating and control elements at viewing height
Power supply:
400 V, 3 phases, 50 Hz
460 V, 3 phases, 60 Hz
connection cable 5,0 m with 32 A plug (50/60 Hz), earth terminal
Dimensions: Length 800 mm x Width 450 mm x Height 1100 mm
Weight: approx. 180 kg

EQUIPMENT

Standard accessory kit from 400 bar

10 m high-pressure hose DN10, kink protection on both sides
High-pressure gun HP500 soft CL with swivel joint in the inlet
Jet pipe CL with nozzle guard incl. high-pressure nozzle

For devices from 400 bar

Similar Products

SERIES UHD

The UHD series is designed for the most demanding industrial applications where maximum performance is required. With an operating pressure ranging from 1,000 to 2,000 bar, it is ideal for particularly intensive surface preparation and material removal tasks. At the same time, it impresses with its simple and robust design, which ensures high reliability. Despite its enormous power, the system remains particularly easy to handle and flexible in use, weighing only 650 kg and featuring compact dimensions.

PRESSURE

up to 2000 bar

FLOW RATE

up to 18 L/min

POWER

30,0 kW

SERIES H5031

The CLENA H5000 Series offers the maximum robustness and durability and is designed for the toughest industrial environments and construction sites. With 30 L/min flushing capacity at 500 bar water pressure, the machines deliver amazing results, e.g. in concrete blasting or tank cleaning.

PRESSURE

500 bar

FLOW RATE

30 L/min

MOTOR POWER

30,0 kW

SERIES H9000

Developed for professional use in industry, the H-Series is available in a wide range of pressure and flow combinations up to 500 bar and 60 L/min. This allows exact adaption to any customer requirement. These machines are designed for continuous use in demanding cleaning tasks, when there must be no compromises.

PRESSURE

170 bar to 500 bar

FLOW RATE

15 L/min to 60 L/min

MOTOR POWER

11,0 kW to 18,5 kW

Get in Touch Now

Are you looking for a durable and powerful cleaning solution? Then CLENA Solutions GmbH is the right choice for you. Contact us for a personalized consultation – together, we’ll find the optimal solution for your cleaning requirements.

Our Products