Cold water high-pressure washers
Series M3500
For extreme pollution of very large areas, we build this power pack with up to 11 kW at up to 350 bar and a flushing performance of 40 L/min. In addition to the standard configurations, the unit can also be used as a platform for many different special tasks.
Druck
100 bar bis 350 bar
Durchflussmenge
15 L/min bis 40 L/min
Leistung
6,5 kW bis 11 kW
Model variations
| Art.No | Pressure bar | Flow rate L/min | Motor power kW | Nozzle ø | Foam Nozzle ø |
|---|---|---|---|---|---|
| M3515065 | 240 | 15 | 6,5 | 045 | 1,5 |
| M3518065 | 200 | 18 | 6,5 | 055 | 1,8 |
| M3521065 | 170 | 21 | 6,5 | 070 | 1,8 |
| M3525065 | 150 | 25 | 6,5 | 090 | 2,1 |
| M3515075 | 270 | 15 | 7,5 | 035 | 1,25 |
| M3521075 | 200 | 21 | 7,5 | 065 | 1,8 |
| M3525075 | 170 | 25 | 7,5 | 080 | 2,1 |
| M3530075 | 150 | 30 | 7,5 | 100 | - |
| M3535075 | 120 | 35 | 7,5 | 140 | - |
| M3540075 | 100 | 40 | 7,5 | 180 | - |
| M3518110 | 350 | 18 | 11 | 040 | - |
| M3530110 | 200 | 30 | 11 | 090 | - |
| M3535110 | 170 | 35 | 11 | 110 | - |
| M3540110 | 150 | 40 | 11 | 140 | - |
Device features
Equipment
- Stainless steel frame
- Powerful motors in many performance classes with long service life due to low speed (1,450/1,750 1/min)
- Triplex high-pressure pump with brass cylinder head, full ceramic pistons and stainless steel valves, oil-bath lubricated, low-noise and vibration-free
- Easy to handle due to strong tube diameter of 38 mm
- Ergonomically designed for good manoeuvrability
- optimised centre of gravity
- Chassis with rubber tyres and large wheel diameter of 300 mm
- Crane lifting points on the unit for safe lifting during transport
- Winding of the connecting cable in the handle area
- Lance pick-up on left side of unit
- Water inlet temperature up to 60 °C (standard)
- Chemical suction on units up to 21 L/min at 200 bar as standard
- Power supply: 400 V, 3 phases, 50/60 Hz optional up to 480 V,
10 m connection cable, 400 V plug 16 A - Dimensions: Length 960 mm x Width 600 mm x Height 1100 mm
- Weight: approx. 120 kg
Including
Standard accessory kit SWS
- 10 m high-pressure hose DN10, kink protection on both sides
- High-pressure gun HDP350 with quick coupling and swivel joint in the inlet
- Double jet pipe made of stainless steel with high- and low- pressure nozzle
For devices up to 350 bar